top of page

Magazine & Ammunition Carriers

 

Belt loops/slots are made for 1-1/2" belts by default, but I can accommodate other belt sizes. Just let me know which size you need.

 

All products are available in the colors shown below.

Top row, L to R: Black, Russet Brown, Saddle Tan, Walnut, and Suntan.

Bottom Row, L to R: Cordovan, Royal Blue, Purple, Pink, and Natural.

​

Please note: snap-on magazine carriers are not available to fit 1-3/4" belts.

 

Please note: By default, all magazine carriers are designed to carry magazines in a bullets-forward orientation. If you need something different than that, please contact me.

2020 Color Options web.jpg
Barnacle IWB
Single-stack mags $60, Double-stack mags $80

 

The Barnacle is an Inside-the-Waistband magazine carrier. It attaches to the belt with a single belt loop, which fastens with a Pull The Dot one-way snap.

 

The magazine is held at a forward cant to prevent the magazine from "printing" through clothing while bending over or sitting.

 

For double-stack magazines, an additional piece of thick leather is sewn to the inside of the carrier, which reduces the sharp angles against the body, and aids comfort considerably.

 

The Barnacle has three different body shield options:

  1. No body shield.

  2. Half body shield: This covers the sharp rear edge of the magazine baseplate, but still allows for a speedy reload.

  3. Full body shield: This covers the entire magazine.

Anemone - $50

 

The Anemone is a simple magazine carrier with a sewn belt loop. These are great for range use, but can still be concealed.

Limpet - $55
      Add exotic trim +$25
      Add embossed trim +$15
Double Limpet - $80
      Add exotic trim +$40
      Add embossed trim +$30

 

The Limpet and Double Limpet are pancake-style magazine carriers. The magazines are held at a forward cant to prevent "printing" through clothing while bending or sitting.

 

The Limpet and Double Limpet can be made three different ways:

  1. Without a body shield (left). There is slight raised edge on the inner layer to ease re-inserting the magazine.

  2. With a half body shield (center). This covers the rear edges of magazines with sharp baseplates, but still allows a speedy reload.

  3. With a full body shield (right). This covers the entire magazine.

Urchin - $55
      Add exotic trim +$25
      Add embossed trim +$15
Double Urchin - $80
      Add exotic trim +$40
      Add embossed trim +$30

 

The Urchin and Double Urchin are pancake-style single magazine carriers that hold the magazines vertically.

 

The Urchin and Double Urchin can be made three ways:

  1. Without a body shield. There is slight raised edge on the inner layer to ease re-inserting the magazine.

  2. With a half body shield. This covers the rear edges of magazines with sharp baseplates, but still allows a speedy reload.

  3. With a full body shield (shown). This covers the entire magazine.

Moray - $75
      Add exotic trim +$45
      Add embossed trim +$30
Double Moray - $100
      Add exotic trim +$55
      Add embossed trim +$40

 

The Moray and Double Moray are pancake-style snap-removable magazine carriers. The magazines are held at a forward cant to prevent "printing" while sitting or bending.

 

The Moray and Double Moray can be made three ways:

  1. Without a body shield. There is slight raised edge on the inner layer to ease re-inserting the magazine.

  2. With a half body shield. This covers the rear edges of magazines with sharp baseplates, but still allows a speedy reload.

  3. With a full body shield (shown). This covers the entire magazine.

​

Please note: snap-on magazine carriers are not available to fit 1-3/4" belts.

Barracuda - $75
      Add exotic trim +$45
      Add embossed trim +$30
Double Barracuda - $100
      Add exotic trim +$55
      Add embossed trim +$40

 

The Barracuda and Double Barracuda are pancake-style snap-removable magazine carriers. The magazines are held vertically.

 

The Barracuda and Double Barracuda can be made three ways:

  1. Without a body shield. There is slight raised edge on the inner layer to ease re-inserting the magazine.

  2. With a half body shield. This covers the rear edges of magazines with sharp baseplates, but still allows a speedy reload.

  3. With a full body shield (shown). This covers the entire magazine.

​

Please note: snap-on magazine carriers are not available to fit 1-3/4" belts.

Croc - $55

 

The Croc is a pouch that holds a revolver speed-strip.

 

Currently, the Croc is only available for .38/.357 6-round speed strips. If you need something different, please drop me a line and let me know!

bottom of page